top of page

Note: Mulgo Pop Top shown in this video is V1 including optional Fanello Bed.


Mulgo Pop Top V2

to suit Toyota Landcruiser 75/78 Series

Built from aluminium, it’s light-weight, and the solid construction ensures that the offroad capability of the original vehicle is not impacted.
The painted lifting section of the roof gives it a the sleek look and rounds off vehicle integration. 

The full standing height inside your vehicle gives you the added privacy you often miss while camping and superior comfort when the weather is not favourable.


Easy to Use

Featuring strong gas-struts and two release latches accessible from the inside, the Pop-top Roof is lifted in seconds. The rigid platform supporting the overnight bed can be lowered independently of the Pop-top Roof, thus allowing full standing height.


Comfortable Bed for Two

The comfortable 70mm dual layer, high density mattress measures 205cm by 120 cm. Your sleeping bags or doonas will remain in place while the roof is down, snuggly fitting into the space between the supporting platform and the roof.

As an upgrade we exclusively offer the Swiss-Designed Fanello Bed. With its timber slats and patented latex cushions, you will have the best possible support and most comfortable sleep. Together with the 70mm dual layer mattress it gives you a total of 120mm of cushioning.


Cross Ventilation

Windows on both sides as well as at the back allow sufficient aeration. All windows are covered with mosquito nets, and can be closed from the inside using the Velcro® lining. The large windows allow for panoramic views from your bed.


Full Weather Protection

Using high-tech canvas Airtex®, a light-weight, extremely durable and breathable material, and quality seals ensure the vehicle is fully weather tight.


Fuel Efficient

The low profile and integrated, light-weight construction of the aluminium Pop-top Roof ensures that the aerodynamic properties of your vehicle are minimally impacted, thus ensuring that the change in fuel efficiency of your car is not noticeable. The conversion only adds 35mm to the overall height of the vehicle.


Loading Space

The Mulgo V2 Pop Top Roof for the Troopy has a plain aluminium frame (2-pack colour matched to your vehicle) and an aluminium chequer plate insert. With the standard tie down rails fitted, the roof can be used as a roof rack to transport additional gear. No additional racking system is needed (it can however be added for supporting surfboards etc.)


Engineering Certificate

The design and manufacturing of the Mulgo Pop Top has been fully certified by a NSW Motor Vehicle Engineer. 

All our conversions are supplied by the installer with an engineering certificate valid for the state where the fitment was performed - other states on request.


Starting at $17,950, including

  • Engineering (NSW and QLD) 

  • Fitment in our Workshop in Mortdale.

  • GST

Contact us for a personalised quote.

Standard Inclusions

  • manufacturing and fitting of pop top conversion in our workshop

  • NSW Engineering Certificate (other states on request)

  • lower frame colour matched to your vehicle colour, using automotive 2-pack paint

  • Dual finish lifting roof with flat aluminium (colour matched) outer frame and chequer plate insert.

  • roof insulated and covered with roof lining

  • tie down rails fitted to roof, four load rings supplied

  • LED roof light with hi and low setting

  • 2x LED reading lights with hi/low setting and USB charging port

  • internally mounted, self locking heavy duty tie down latches (allow for quick opening and safe closing of the Mulgo Pop Top)

  • one window on either side and one at the rear

  • mosquito netting on all three windows

  • window covers open top down internally for maximum privacy and regulation of airflow

  • gas strut assisted lifting bed platform to allow for full standing height

  • 70mm twin layer high density mattress with soft layer and removable cover

Optional Extras

​This list could be endless and all depends on your style of travelling and what you have already installed, not to forget where you want to travel to in your Troopy. We just mention a few things what most of our customers add to their new Mulgo Pop Top conversion.

  • Fanello Slatted Bed upgrade ($950)

  • roof mounted solar installation

  • awning

  • interior fit out

Troopy V2
bottom of page