Do you have limited garage clearance? Don’t use your roof top tent year around? Maybe you just don’t want to keep the tent on your vehicle for errands or everyday life. Front Runner's Quick Release Tent Mount Kit gives a roof top tent camper the freedom to mount or remove the tent in seconds and with no tools. Two built-in locks give you safety and added peace of mind.
- Once these brackets are installed on a Front Runner Rack, no tools are needed to remove or install a roof top tent. Simply release the tabs on the 4 latches and lift the tent away in seconds.
- No more wrenching in tight spaces during the “off-season” or time consuming weekday removal of a roof top tent.
- This strong and rattle free mounting system is built off-road tough for use with Front Runner Racks.
- Works with the Roof Top Tent - by Front Runner and other popular soft shell tent brands like TJM, ARB, Tepui, etc.
- Works with hard shell tents such as Autohome/Maggionlina, and James Baroud. Hard shell tent owners please read *IMPORTANT NOTE below.
- 4 low profile base brackets are bolted to a Front Runner Rack while 4 self- aligning bushes are secured to the tent base channels using the supplied plates.
- Two of the latches securely lock with a key while the other 2 latching brackets feature a safety catch.
- Comes with 4 keys for locking brackets.
- Tents can be mounted at two different heights, depending on clearance needs. The bottom of the tent can sit either 40mm / 1.57 inches or 17mm / 1 inch above the rack slats.
- Certain tent sizes and designs will dictate the height needed to clear the edge of the Front Runner Rack.
- The brackets are small, unobtrusive and can be left on the roof rack when the tent is not mounted, leaving vast rack space available
- No tent modification required.
- Removed tents can be stored on the ground, raised slightly off the floor by the supplied steel bushes.
- Supplied with all required mounting hardware and a special installation tool.
- Fitting instructions are included.
*IMPORTANT NOTE: Hard shell tents need additional support. If you are using these brackets with hard shell tents, such as James Baroud or Autohome, and you are unable to position the tent to rest directly on the rack, or the edges of the rack side profiles, use – Hard Shell Tent Support Channels - by Front Runner. Depending on the tent manufacturer, your hard shell tent warranty may be voided if your tent becomes damaged and you did not provide proper lateral support for the hard shell tent
- 1 x Set of 4 Quick Release Brackets
- 2 x Locking Brackets (Left and Right Hand Side)
- 2 x Keys per lock
- 1 x Special Installation Tool
- Installation Hardware
- Fitting Instructions
- Black powder coated 3CR12 stainless steel
- 316 Stainless steel
- 304 Stainless steel
Product Dimensions: (Per assembled bracket)
- 263mm L x 93mm W x 93mm H
Be The First To Review This Product!
Help other Expedition Centre users shop smarter by writing reviews for products you have purchased.