The seat box corners take a real hammering and can look pretty ordinary very quickly getting knocked about as people get in and out.
Nugget Stuff now has the solution with fully Australian Made polyurethane, Corner Protectors. Available in 2 versions depending on your preference:-
1. Stick on with industrial double sided tape. Importantly the mat must be cleaned with Wax and Grease remover to ensure good adhesion. Any residual silicon will stop the tape from sticking.
2. Screw on. Place in position and drill 3.5mm holes then screw on with supplied screws.
Sold in Pairs
Tough, quick, easyBy: dj on 18 December 2017Does the job. Underside very shiny and could do with some roughing up to get a better grip. Also swapped out the tape for thicker Gorilla tape to push into the 'bubbled' effect Defender flooring.